Quality Since 1976!       Design-Engineer-Manufacture-Install

Click on thumbnails below to see specifications and photos of each model

  • 0072
    Pool Slide Model 0072
  • 1676
    Pool Slide Model 1676
  • 1677
    Pool Slide Model 1677
  • 1800-52
    Fiberglass Pool Slide Model 1800-52
  • 2100
    Fiberglass Pool Slide Model 2100
  • 7008
    Pool Slide Model 7008
  • 8010
    Pool Slide Model 8010
  • 9106
    Pool Slide Model 9106
  • 9108
    Pool Slide Model 9108
  • 9206
    Pool Slide Model 9206
  • 9208
    Pool Slide Model 9208
  • 9210
    Pool Slide Model 9210
  • 9211
    Pool Slide Model 9211

Single Flume Pool Slide Model 0072Pool Slide Water Slide
Model 0072

Description: Single flume slide with one straight 24" O.D. flume.
Centerline Run: 12' 8"
Entry Height: 5' 6"
Platform Size: 4' x 4'
Space Requirements: 9' 0" x 15' 0" – Space requirements may vary with options chosen.

  • 24" Outside diameter polyethylene flume
  • 10 gpm water flow recommended; 8 to 40 gpm required.
  • Splash down dimension: 12' x 20'
  • Minimum water depth: 4 ' 0'

click on images to enlarge

DownloadDownload Spec Sheet
 Requires Adobe Acrobat

Single Flume Pool Slide Model 1676Pool Slide Water Slide
Model 1676

Description : Single 30" I.D. flume water slide with a 180° turn.
Centerline Run : 19’ 1”
Entry Height : 6' 0"
Platform : Integrated landing
Space Requirements : 19’ 3" x 10' 9" – Space requirements may vary with options chosen.

  • 30" Inside diameter polyethylene water slide flume
  • Stairs: 7” rise, 11” tread, 36” wide;
    Aqua-Plast coated textured aluminum surface; closed risers.
  • Deck top mounted
  • 20 gpm water flow recommended; 20 to 40 gpm required.
  • Splash down dimension: 12' 6" x 20' 0"
  • Minimum water depth: 3'

DownloadDownload Spec Sheet
 Requires Adobe Acrobat

click on images to enlarge

Single Flume Pool Slide Model 1676 Single Flume Pool Slide Model 1676 Single Flume Pool Slide Model 1676 Single Flume Pool Slide Model 1676 Single Flume Pool Slide Model 1676 Single Flume Pool Slide Model 1676 Single Flume Pool Slide Model 1676

DownloadDownload Spec Sheet
 Requires Adobe Acrobat

Single Flume Pool Slide Model 1677 with 48 inch wide stairsPool Slide Water Slide
Model 1677

Description : Single 30" I.D. flume water slide with a 270° turn.
Centerline Run : 29' 1”
Entry Height : 8' 4"
Platform : 3' x 4'
Space Requirements : 18’5" x 12' 9" – Space requirements may vary with options chosen.

  • 30" Inside diameter polyethylene water slide flume
  • Stairs: 7” rise, 11” tread, 48” wide;
    Aqua-Plast coated textured aluminum surface; closed risers.
  • Deck top mounted
  • 14-20 gpm water flow recommended; 8 to 40 gpm required.
  • Splash down dimension: 12' 6" x 20' 0"
  • Minimum water depth: 3'

click on images to enlarge

Single Flume Pool Slide Model 1677 with 48 inch wide stairs Single Flume Pool Slide Model 1677 with 48 inch wide stairs
48" wide stairs
Single Flume Pool Slide Model 1677 plan view Single Flume Pool Slide Model 1677 plan view

DownloadDownload Spec Sheet
 Requires Adobe Acrobat

Family Fun Fiberglass Slide Model 1800-52Fiberglass Water slide
Model: 1800-52

Description : Single fiberglass open flume family fun slide.
Centerline Run : 7' 9 "
Entry Height : 2' 11 "
Platform Size : 5' x 3'
Space Requirements : 5' 6" x 14' 9"

  • Fiberglass water slide flume, 60" inside width
  • Water slide flume: ultra violet stabilized gel coat
  • Platform: Aqua-Plast coated textured aluminum surface.
  • Stairs: 7” rise, 11” tread, 36” wide;
    Aqua-Plast coated textured aluminum surface; closed risers.
  • 4-6 gpm water flow required
  • Splash down dimension 13' x 20'
  • Minimum water depth: 0" - 2'

DownloadDownload Spec Sheet
 Requires Adobe Acrobat

click on images to enlarge

Family Fun Fiberglass Slide Model 1800-52 Family Fun Fiberglass Slide Model 1800-52 Family Fun Fiberglass Slide Model 1800-52 Family Fun Fiberglass Slide Model 1800-52Family Fun Fiberglass Slide Model 1800-52 plan view Family Fun Fiberglass Slide Model 1800-52 plan view

Fiberglass Pool Slide Model 2100Open Flume Fiberglass Pool Slide
Model: 2100 *

Description : Single fiberglass open flume water slide.
Centerline Run : 23' 3 "
Entry Height : 5' 3 "
Platform Size : 6' 10" x 10' 6"
Space Requirements : 14' 7" x 26' 7"

  • 8’ wide (96”) open fiberglass flume
  • Water slide flume: ultra violet stabilized gel coat
  • Platform: Aqua-Plast coated textured aluminum surface.
  • Stairs: 7” rise, 11” tread, 36” wide;
    Aqua-Plast coated textured aluminum surface; closed risers.
  • 300-500 gpm water flow required
  • Splash down dimension 18’ 0” x 14’ 0”'
  • Minimum water depth: 3’ 0” (within 6” of water level) or 1’ 6” with landing pad
Series Models Available*
Model Slide Entrance Height Centerline Run
2100 5’ 3” 23' 3"
2101 6' 5" 26' 8"
2102 8’ 2” 31' 9"
2103 9’ 11” 36' 11"

 

DownloadDownload Spec Sheet
 Requires Adobe Acrobat

click on images to enlarge

Fiberglass Pool Slide Model 2100

Fiberglass Pool Slide Model 2100

Fiberglass Pool Slide Model 2100

Fiberglass Pool Slide Model 2100 plan view

DownloadDownload Spec Sheet
 Requires Adobe Acrobat

Single Flume Pool Slide Model 7008Pool Slide Water Slide
Model 7008

Perfect for limited space! Fits in extremely narrow deck locations.
*Note: fits in a width of 4'Single Flume Pool Slide Model 7008

Description : Single I.D. 30" flume slide with a 45° turn near the exit.
Centerline Run : 18' 8"
Entry Height : 8' 6"
Platform Size : 4' x 4'
Deck Space Requirement : 20' 7" x 11' 4" with stairs on the side – Space requirements may vary with options chosen.

  • 30" Inside diameter polyethylene flume
  • 20 gpm water flow recommended; 8 to 40 gpm required.
  • Splash down dimension: 12' 6" x 20' 0"
  • Minimum water depth: 5'
    (within 6” of water level)

DownloadDownload Spec Sheet
 Requires Adobe Acrobat

Single Flume Pool Slide Model 7008 Single Flume Pool Slide Model 7008

click on images to enlarge

Single Flume Pool Slide Model 8010Pool Slide Water Slide
Model 8010

Description: 30" I.D. straight flume slide.
Centerline Run: 25' 6"
Entry Height: 10' 6"
Platform Size: 4' x 4'
Deck Space Requirement: 13' x 26' – Space requirements may vary with options chosen.

  • 30" Inside diameter polyethylene flume
  • 14-20 gpm water flow recommended; 8 to 40 gpm required.
  • Splash down dimension: 12' 6" x 20' 0"
  • Minimum water depth: 5' 6"
    (within 6” of water level)
“Big Hit, As soon as I turned on the water
it was a kid magnet”
Robert Smith, Lake Wallkill, NJ
Lake Association board member

click on images to enlarge

DownloadDownload Spec Sheet
 Requires Adobe Acrobat

Single Flume Pool Slide Model 8010 Single Flume Pool Slide Model 8010Single Flume Pool Slide Model 8010

Single Flume Pool Slide Model 9106Pool Slide Water Slide
Model 9106

Description: Single 30" I.D. flume slide, with a 90° curve.
Centerline Run: 20' 5"
Entry Height: 6' 6"
Platform Size: 4' x 4'
Deck Space Requirement: 17' 0" x 18' 2" – Space requirements may vary with options chosen.

  • 30" Inside diameter polyethylene flume
  • 14-20 gpm water flow recommended; 8 to 40 gpm required.
  • Splash down dimension: 12' 6" x 20' 0"
  • Minimum water depth: 3' 6"
    (within 6” of water level)

click on image to enlarge

DownloadDownload Spec Sheet
 Requires Adobe Acrobat

Single Flume Pool Slide Model 9108Pool Slide Water Slide
Model 9108

Description: Single 30" I.D. flume slide, with a 90° curve.
Centerline Run: 22' 0"
Entry Height: 8' 6"
Platform Size: 4' x 4'
Deck Space Requirement: 12' 6" x 23' 0" – Space requirements may vary with options chosen.

  • 30" Inside diameter polyethylene flume
  • 14-20 gpm water flow recommended; 8 to 40 gpm required.
  • Splash down dimension: 12' 6" x 20' 0"
  • Minimum water depth: 5'
    (within 6” of water level)

click on image to enlarge

DownloadDownload Spec Sheet
 Requires Adobe Acrobat

Single Flume Pool Slide Model 9206Pool Slide Water Slide
Model 9206

Ideal Usage: Excellent slide for ages 6-12.

Description: Single 30" I.D. flume slide, with a 90° curve.
Centerline Run: 17' 6"
Entry Height: 6' 6"
Platform Size: 4' x 4'
Space Requirements: 22' 5 " x 10' 2 " – Space requirements may vary with options chosen.

  • 30" Inside diameter polyethylene flume
  • 14-20 gpm water flow recommended; 8 to 40 gpm required.
  • Splash down dimension: 12' 6" x 20' 0"
  • Minimum water depth: 3' 6"

click on images to enlarge

Single Flume Pool Slide Model 9206

DownloadDownload Spec Sheet
 Requires Adobe Acrobat

Safety Gate, Single Flume Pool Slide Model 9208Pool Slide Water Slide
Model 9208

Description:Single 30" I.D. flume slide, with a 90° curve.Single Flume Pool Slide Model 9208
Centerline Run: 20' 2"
Entry Height: 8' 6"
Platform Size: 4' x 4'
Space Requirements:19' 0" x 11' 4" – Space requirements may vary with options chosen.

  • 30" Inside diameter polyethylene flume
  • 14-20 gpm water flow recommended; 8 to 40 gpm required.
  • Splash down dimension: 12' 6" x 20' 0"
  • Minimum water depth: 5' 6"

click on images to enlarge

Single Flume Pool Slide Model 9208

DownloadDownload Spec Sheet
 Requires Adobe Acrobat

Single Flume Pool Slide Model 9208

DownloadDownload Spec Sheet
 Requires Adobe Acrobat

Single Flume Custom Pool Slide Model 9208

DownloadDownload Spec Sheet
 Requires Adobe Acrobat

Single Flume Pool Slide Model 9210Pool Slide Water Slide
Model 9210

Description: Single 30" I.D. flume slide, with a 90° curve.
Centerline Run: 28' 2"
Entry Height: 10' 6"
Platform Size: 4' x 4'
Space Requirements: 27' 5"x 13' 5" – Space requirements may vary with options chosen.

  • 30" Inside diameter polyethylene flume
  • 14-20 gpm water flow recommended; 8 to 40 gpm required.
  • Splash down dimension: 12' 6" x 20' 0"
  • Minimum water depth: 5' 6"

click on images to enlarge

Single Flume Pool Slide Model 9210

DownloadDownload Spec Sheet
 Requires Adobe Acrobat

Single Flume Pool Slide Model 9211Pool Slide Water Slide
Model 9211

Description: Single 30" I.D. flume slide, with a 90° curve.
Centerline Run: 25" 7'
Entry Height: 10' 6"
Platform Size: 4' x 4'
Space Requirements: 28' 2"x 16' 1" – Space requirements may vary with options chosen.

  • 30" Inside diameter polyethylene flume
  • 14-20 gpm water flow recommended; 8 to 40 gpm required.
  • Splash down dimension: 12' 6" x 20' 0"
  • Minimum water depth: 5' 6"

click on images to enlarge

DownloadDownload Spec Sheet
 Requires Adobe Acrobat

Single Flume Pool Slide Model 9211 plan viewSingle Flume Pool Slide Model 9211 plan view

USA flag   Manufactured with Pride in the U.S.A.